Cart 0
Cart 0

Brief Instruction on the Installation of Peel and Stick Tiles

 

Tool Required:

  • A sharp utility knife/scissors
  • A laser level/torpedo level.

Step 1: Pre the wall:

  1. Lightly sand the wall to remove small imperfections if the wall is not smooth. 
  2. Clean the wall and make sure that the surface is completely clean and dust-free.

Step 2: Determine the Size and Design:

Measure the area in advance and pre-lay the tiles on flat surface at the exact ratio of the wall to determimne the number and the direction of the installation.

Step 3: Putting up the tiles on the surface:

  1. Cutting The Tile: Use a utility knife to score a straight line and snap it off, then cut it with scissors.

  2. Use a laser level to determine both horizontal and vertical alignment. Begin at the bottom-left corner of the wall, apply tiles from left to right, and repeat the process upward.

For more details, please refer to the following page: https://dicofun.com/pages/installation-instructions